Features:

   Bullet 1 - Click image to download. Uses Dual DATAC chip

   Bullet 1 - Click image to download. Direct access to XPP & RPP

   Bullet 1 - Click image to download. Basic Protocol & Combined Protocol

   Bullet 1 - Click image to download. Block & Independent Modes

   Bullet 1 - Click image to download. Multiple Dual Data Buffers

   Bullet 1 - Click image to download. High Resolution System Timer

   Bullet 1 - Click image to download. Cyclic Redundancy Checking (CRC)

   Bullet 1 - Click image to download. Multiple Channel facility

  

    Features:

   Bullet 1 - Click image to download. Multiple Protocol facility

    Bullet 1 - Click image to download. Bus Monitoring including:

   Bullet 1 - Click image to download. Label & Extension

   Bullet 1 - Click image to download. Time stamping

   Bullet 1 - Click image to download. Error Status

   Bullet 1 - Click image to download. Word & Word-String Count

   Bullet 1 - Click image to download. External Timer Clock input

   Bullet 1 - Click image to download. Daughter Board fit to Sy629VME-BP-M
 
Description:

The Sy629VME-CP-M card provides a convenient means for monitoring ARINC 629 bus traffic, while transmitting and receiving data in accordance with programme data written into the XPP and RPP personality memory. The design provides the capability to transmit messages under Basic Protocol (BP) or Combined Protocol (CP). This is achieved using two terminal controllers, one handling the periodic messages associated with Basic Protocol and the second terminal controller handling the aperiodic messages associated with Combined Protocol. This card is a module fit to the Sy629VME-BP-M and therefore includes many of the features associated with full bus monitoring.

The use of the recognised DATAC chip ensures full compliance with ARINC 629 specification with Basic Protocol (BP).

  
 

Specification:

 

Power Requirements (maximum)

+   5V at 2.5 A
+ 15V at 400 mA
-  15V at 400 mA

Address Selection

Addressable on 128k boundaries

VME Interface

A24, A32, D16

Connector Type

DIN 41612, P1-96 pin, P2-96 pin

Input/Output Connector

Outer rows of P2 and Front Panel D-Type connectors

Operating Temperature

   0° C to + 70° C

Storage Temperature

- 25° C to + 85° C

Relative Humidity

 0 to 95% (non condensing)
 

 

Ordering Information and Variants:

 Sy629VME-CP-M :

 ARINC-629 to VMEbus interface. BP/CP Protocol, Transmitter & Full Bus Monitor

 Sy629VME-BP-M :

 ARINC-629 to VMEbus interface. Transmitter & Full Bus Monitor under Basic Protocol (BP)

 Sy629VME-BP-M-CC :

 ARINC-629 to VMEbus interface. Transmitter & Full Bus Monitor under BP. Conduction Cooled

 Sy629VME-BP-E :

 ARINC-629 to VMEbus interface. Basic Protocol (BP), Error Insert & Detect Module

 Sy629VME-BP-T :

 ARINC-629 to VMEbus interface. Basic Protocol (BP), Multi-Terminal Emulation

 Sy629VME/VSB-MCE :

ARINC-629 to VME/VSBbus interface. BP/CP Protocol, uses MCE chip set

 Sy629VME/VSB-E :

ARINC-629 to VME/VSBbus interface. BP/CP Protocol, uses MCE chip set. Error Insertion & Detection Module

 Request more information

 

BACK to Sycos Home Page

 

Contact Details:

  
 

Sycos AES
Hambledon Manor, Iwerne Minster, Blandford Forum, Dorset, England. DT11 8QS
Tel:   +44 (0) 1747 812 486
Fax: +44 (0) 1747 812 486
SYCOS Copyright © 2006

  
 

 

 If you have any comments on our web-page design, please E-mail us at webmaster@sycos.co.uk.