Features:

   Bullet 1 - Click image to download. Uses Single DATAC chip

   Bullet 1 - Click image to download. 120 ARINC 629 Terminals

   Bullet 1 - Click image to download. Dynamic Terminal Insert & Delete

   Bullet 1 - Click image to download. Basic Protocol Preserved at all times

   Bullet 1 - Click image to download. Full ARINC 629 Bus Monitoring

   Bullet 1 - Click image to download. Direct Access to XPP & RPP

   Bullet 1 - Click image to download. Block & Independent Modes              Bullet 1 - Click image to download. Cyclic Redundancy Checking (CRC)

   Bullet 1 - Click image to download. Primary and Alternate Schedules      Bullet 1 - Click image to download. Refresh Counter Support

   Bullet 1 - Click image to download. Multiple Dual Data Buffers                 Bullet 1 - Click image to download. On Board Digital Signal Processor

 

  
 
Description:

The Sy629VME-BP-T card is an ARINC 629 to VMEbus interface packaged in a standard 6U, single slot format and provides a cost effective means for emulating up to 120 ARINC 629 Terminals, transmission and reception, with full data bus monitoring, through a single connection to the ARINC-629 data bus.

With a single connection to an ARINC 629 data bus, the card provides facilities to add and delete terminals to/from the bus 'on-the-fly', whilst preserving the protocol. Emulated terminals compete with true terminals for bus access, in accordance with Basic Protocol. Important features such as refresh counter support and CRC checking are embedded in the design.

The features and facilities of the Sy629VME-BP-M card are embodied within the design of this product, making it a most comprehensive facility for most applications using Basic Protocol.

The product is well established and is supporting many commercial, in-service, Boeing 777 full flight simulators.

 
 

Specification:

 

Power Requirements (maximum)

+   5V at 2.5 A
+ 15V at 400 mA
-  15V at 400 mA

Address Selection

Addressable on 128k boundaries

VME Interface

A24, A32, D16

Connector Type

DIN 41612, P1-96 pin, P2-96 pin

Input/Output Connector

Outer rows of P2 and Front Panel D-Type connectors

Operating Temperature

0° C to + 70° C

Storage Temperature

- 25° C to + 85° C

Relative Humidity

 0 to 95% (non condensing)
 

 

Ordering Information and Variants:

 Sy629VME-BP-T :

 ARINC-629 to VMEbus interface. Basic Protocol (BP), Multi-Terminal Emulation

 Sy629VME-BP-M :

 ARINC-629 to VMEbus interface. Transmitter & Full Bus Monitor under Basic Protocol (BP)

 Sy629VME-BP-M-CC :

 ARINC-629 to VMEbus interface. Transmitter & Full Bus Monitor under BP. Conduction Cooled

 Sy629VME-BP-E :

 ARINC-629 to VMEbus interface. Basic Protocol (BP), Error Insert & Detect Module

 Sy629VME-CP-M :

 ARINC-629 to VMEbus interface. BP/CP Protocol, Transmitter & Full Bus Monitor

 Sy629VME/VSB-MCE :

ARINC-629 to VME/VSBbus interface. BP/CP Protocol, uses MCE chip set

 Sy629VME/VSB-E :

ARINC-629 to VME/VSBbus interface. BP/CP Protocol, uses MCE chip set. Error Insertion & Detection Module

 Request more information

 

BACK to Sycos Home Page

 

Contact Details:

  
 

Sycos AES
Hambledon Manor, Iwerne Minster, Blandford Forum, Dorset, England. DT11 8QS
Tel:   +44 (0) 1747 812 486
Fax: +44 (0) 1747 812 486
SYCOS Copyright © 2006

  
 

 

 If you have any comments on our web-page design, please E-mail us at webmaster@sycos.co.uk.