Error Insert/Detect Features:

 

   Bullet 1 - Click image to download. Transmit Frequency Control

   Bullet 1 - Click image to download. Delay of Bus Quiet Signal (BUSQ)

   Bullet 1 - Click image to download. Generation of Babble

   Bullet 1 - Click image to download. Generation of Bus Clash

   Bullet 1 - Click image to download. Error Detection at the bit level

 

  

    Error Insert Features:

   Bullet 1 - Click image to download. Gap error (3-bit)

   Bullet 1 - Click image to download. Gap error (5-bit)

   Bullet 1 - Click image to download. Sync error (short)

   Bullet 1 - Click image to download. Sync error (long)

   Bullet 1 - Click image to download. Parity error

   Bullet 1 - Click image to download. Bi-phase error

   Bullet 1 - Click image to download. Bit-count error (-1)

   Bullet 1 - Click image to download. Bit-count error (+1)
 
Description:

The Sy629VME/VSB-E is a daughter module fit to the Sy629VME/VSB-MCE card and provides a convenient means for monitoring ARINC 629 traffic whilst providing extensive error detection and identification capability.

The daughter module also provides the ability to insert a comprehensive range of transmit faults, while transmitting and receiving data in accordance with programme data written into the XPP and RPP personality memory.

 

  
 

Specification:

 

Power Requirements (maximum)

+   5V at 2.5 A
+ 15V at 400 mA
-  15V at 400 mA

Address Selection

Addressable on 128k boundaries

VME Interface

A24, A32, D16

Connector Type

DIN 41612, P1-96 pin, P2-96 pin

Input/Output Connector

Outer rows of P2 and Front Panel D-Type connectors

Operating Temperature

   0° C to + 70° C

Storage Temperature

- 25° C to + 85° C

Relative Humidity

 0 to 95% (non condensing)
 

 

Ordering Information and Variants:

 Sy629VME/VSB-E :

 ARINC-629 Error Insertion & Detection Module

 Sy629VME/VSB-MCE :

 ARINC-629 to VME/VSBbus interface. BP/CP Protocol, uses MCE chip set

 Sy629VME-BP-M :

 ARINC-629 to VMEbus interface. Transmitter & Full Bus Monitor under Basic Protocol (BP)

 Sy629VME-BP-M-CC :

 ARINC-629 to VMEbus interface. Transmitter & Full Bus Monitor under BP. Conduction Cooled

 Sy629VME-BP-E :

 ARINC-629 to VMEbus interface. Basic Protocol (BP), Error Insert & Detect Module

 Sy629VME-CP-M :

 ARINC-629 to VMEbus interface. BP/CP Protocol, Transmitter & Full Bus Monitor

 Sy629VME-BP-T :

 ARINC-629 to VMEbus interface. Basic Protocol (BP), Multi-Terminal Emulation

 Request more information

 

BACK to Sycos Home Page

 

Contact Details:

  
 

Sycos AES
Hambledon Manor, Iwerne Minster, Blandford Forum, Dorset, England. DT11 8QS
Tel:   +44 (0) 1747 812 486
Fax: +44 (0) 1747 812 486
SYCOS Copyright © 2006

  
 

 

 If you have any comments on our web-page design, please E-mail us at webmaster@sycos.co.uk.