Features:

   Bullet 1 - Click image to download. 120 ARINC 629 Terminals

   Bullet 1 - Click image to download. Dynamic Terminal Insert & Delete

   Bullet 1 - Click image to download. Basic Protocol Preserved at all times

   Bullet 1 - Click image to download. Full ARINC 629 Bus Monitoring

   Bullet 1 - Click image to download. Uses DATAC chip

   Bullet 1 - Click image to download. Direct Access to XPP & RPP

   Bullet 1 - Click image to download. Block & Independent Modes                         Bullet 1 - Click image to download. Cyclic Redundancy Checking (CRC)

   Bullet 1 - Click image to download. Primary and Alternate Schedules                Bullet 1 - Click image to download. Refresh Counter Support

   Bullet 1 - Click image to download. Multiple Dual Data Buffers                           Bullet 1 - Click image to download. On Board Digital Signal Processor

 

 		 
     
Description:

The Sy629PC-BP-T card is an ARINC 629 to PC-ATbus interface that provides a cost effective means for emulating up to 120 ARINC 629 Terminals, transmission and reception, with full data bus monitoring.

With a single connection to an ARINC 629 data bus, the card provides facilities to add and delete terminals to/from the bus 'on-the-fly', whilst preserving the protocol. Emulated terminals compete with true terminals for bus access, in accordance with Basic Protocol. Important features such as refresh counter support and CRC checking are embedded in the design.

 
 

Specification:

 

Power Requirements (maximum)

+   5V at 2.5 A
+ 15V at 400 mA
-  15V at 400 mA

Address Selection

I/O Addressable in 32 byte blocks

Memory Addressable on 32k or 256k boundaries, depending upon configuration

PC-AT Interface

A24, D16

Input/Output Connector Type

25-pin 'D' Type and 9-pin 'D' Type

Operating Temperature

   0° C to + 70° C

Storage Temperature

- 25° C to + 85° C

Relative Humidity

 0 to 95% (non condensing)
 

 

Ordering Information and Variants:

 Sy629PC-BP-T :

 ARINC-629 to PC-ATbus interface, Basic Protocol (BP), Multi-Terminal Emulation

 Sy629PC-BP-M :

 ARINC-629 to PC-ATbus interface. Transmitter & Full Bus Monitor under Basic Protocol (BP)

 Sy629PC-BP-E :

Error Insertion & Detection Module. Basic Protocol (BP)

 Sy629PC-MCE :

 ARINC-629 to PC-ATbus interface. BP/CP Protocol, uses MCE chip set

 Sy629PC-MCE-E :

 Error Insertion & Detection Module. BP/CP Protocol, uses MCE chip set.

 Request more information

 

BACK to Sycos Home Page

 

Contact Details:

  
 

Sycos AES
Hambledon Manor, Iwerne Minster, Blandford Forum, Dorset, England. DT11 8QS
Tel:   +44 (0) 1747 812 486
Fax: +44 (0) 1747 812 486
SYCOS Copyright © 2006

  
 

 

 If you have any comments on our web-page design, please E-mail us at webmaster@sycos.co.uk.