Home

Sycos Copyright © 2020 All Rights Reserved

SYCOS CELEBRATES 30 YEARS SERVICE IN COMMERCIAL AVIONICS INDUSTRY!
Aerospace and Electronic Systems

Home > Products > 6-wire > 561 to VME

The Sy561VME-22 card is a high performance 6-Wire ARINC 561 to VMEbus interface providing 2 transmit and 2 receive channels, each capable of concurrently transferring data at rates between 4k bits/s and 125k bits/s.


This high performance with 4 communication channels is achieved through the use of hardwired logic, which responds rapidly to system events, manages data transfers to and from the on board memory and provides continuous status information and host interrupts when needed.


The card is programmed by the host processor via a few directly addressable control registers. Once set up, the host processor need only write transmit data to the board and, when required, read received data addressed by channel, label and SDI.


A hardware facility for converting binary to BCD is provided to assist with ARINC 561 data formatting. Conversion is achieved by a simple write/read procedure.

A 32 bit timer is provided with a user selectable resolution down to 10 µ s.




Sales Ref: Sy561VME-RT22



Features


- High Integrity


- 2 Receive Channels


- 2 Transmit Channels


- Loop-back Test Mode


- Versatile Interrupt Facility


- VMEbus interface A24, D16


- 256 ARINC word deep FIFO Buffer per Tx   Channel


- Dual Port Rx Data Buffer addressed by Channel   & Label


- Supports ARINC 568, ARINC 571 and ARINC 582


ARINC 561 TO VME INTERFACE