Home


Aerospace and Electronic Systems
SYCOS CELEBRATES 30 YEARS SERVICE IN COMMERCIAL AVIONICS INDUSTRY!

Sycos Copyright © 2020 All Rights Reserved


Home > ARINC 629 Products > PCIe Products

ARINC 629 PCIe Products

Sycos Arinc-629 Interfaces to PCIe were developed from its VMEbus range of products. All Sycos ARINC-629 cards use approved terminal controllers (DATAC) and System Interface Modules (SIMs) and are therefore in full compliance with Basic Protocol. Sycos ARINC-629 PCIe cards provide a modern suite of cards that continue to support Boeing 777 avionics test, development and flight simulation activities in a Windows, Linux or VxWorks environment. DLLs can be converted to VI’s in support of National Instruments Labview software.


Sycos’ Multi Current-Mode-Coupler Device provides a cost-effective alternative to using individual Current Mode Couplers, allowing up to five stub cable connections per card. Arinc-629 terminals essentially communicate with eachother through their System Interface Modules (SIMs) without a bus connection. Such communication is achieved without loss of message or protocol integrity and is ideal for use in test, development and simulation activities. The unit draws its power from the PCIe bus and does not therefore need any external power supply.


PCIe products supporting Basic Protocol:


•   Sy629PCIe-BPM            Transmitter and Full Bus Monitor


•   Sy629PCIe-BPE             Transmitter and Full Bus Monitor with Error Insert/Detect


•   Sy629PCIe-BPT             Multi-Terminal Emulator (up to 120 terminals)


•   Sy629PCIe-BPTE           Multi-Terminal Emulator (up to 120 terminals), with Error Insert/Detect


•   Sy629PCIe-M-CMC        Multi-Current-Mode-Coupler (5 port)



These ARINC-629 PCIe products are now well established and are employed in many test, development and simulation activities around the globe. In particular, the Sy629PCIe-BPTE card was chosen by Boeing for the Bus Analyzer being employed in the new Boeing 777X development.


All Sycos ARINC-629 PCIe interface cards are software compatible with equivalent PMC cards in its portfolio.